The B77 MK III is equipped with a three-motor drive with direct drive and servo control. Two winding motors bring the tape reels up to operating speed in the shortest possible time or slow them down quickly, precisely and smoothly. The winding motors are particularly strong and robust. Thanks to the increased starting voltage, they bring even heavy metal reels up to operating speed in a matter of seconds. Thanks to the sophisticated technology of the regulated capstan sound motor, even barely perceptible fluctuations in speed are compensated for. The sound shaft of the direct-drive Capstan sound motor is a true masterpiece of precision engineering. Its tolerance is a concentricity of one thousandth of a millimeter. Revox relies on a motor design that has been tried and tested for decades. To this end, the Capstan shafts are produced close to the sound factory in Villingen.

Revox has decades of experience in the manufacture of tape cartridges and has optimized this knowledge for the various tape machines. The professional design of all our cartridges is developed in-house and manufactured to the highest quality using our own processes. Revox tape machines have a total of three sound heads. One playback head, one recording head and one playback head. Among other things, this design enables rear band control. The precision of the pickups is decisive for the recording and playback quality. The special alloy of the tone heads guarantees the best magnetic properties and a long service life. The shape of the sound head mirrors is designed for smooth frequency response down to the lowest frequency. Long pole pieces guarantee a straight frequency response. The core carrier of the heads is milled from solid material with the highest precision to achieve optimum uniformity of the respective track positions. The gap of the playback sound head measures just 2 µm (0.002 mm). The core packages are made of high-quality magnetic material with above-average permeability and minimal losses. This achieves optimum sound voltages and very low distortion. The new Revox B77 MK III uses improved original cartridges with a considerably longer service life. Everything to ensure maximum longevity and sound quality.

Many different 1/4“ 2-track tapes can be played and recorded.:

• 19 cm/sec. recording and playback with 257 nWb/m and NAB
• 38 cm/sec. recording and playback with 510 or 320 nWb/m and NAB or CCIR

Switches available for each of these functions.

• XLR IN/OUT
• Cinch / Cinch via enclosed adapter
• DIP switch for studio and home systems

Special feature XLR connector: Known from studio and audio technology, XLR (External Live Return) connectors are characterized by their robustness, reliability and interference-free signal transmission. The balanced XLR connection ensures the best sound and high-quality transmission - in professional recording studios as well as in private audio systems. Signals can be transmitted via XLR inputs/outputs without loss of quality or noise. With the built-in XLR inputs/outputs, the new Revox B77 MK III is therefore ideally equipped for perfect recording and playback - for private or professional use.

Headphone connection: The headphone amplifier is of the highest quality and suitable for both low and high headphone impedances.

Digital Counter:

• Mode 1: Counter
• Mode 2: Time

The displayed time is calculated from the current meter reading. In addition, the meter speed and the meter reading are used to determine the set belt speed of 19 cm/s or 38 cm/s and the meter reading is converted into a belt running time corresponding to the belt speed.

VU meter: The highest precision is required for the level meters, which is why the Revox VU meters (volume units) are precisely calibrated and have long scales. An LED immediately indicates the risk of overdriving. With this ideal combination of displays, recordings of the highest dynamic range can be made effortlessly. Another advantage is that the display also works during playback.