B77 MKII Tape Recorder

The B77 MKII tape recorder was built from 1980-1998. A true classic and milestone in the audio world, like its predecessor the MKI. The B77 MKII is equipped with a built-in sound motor control (Vari-Speed Control) and revised audio and drive electronics. As a manufacturer, we have been reconditioning our Revox units with original spare parts for decades. You will receive the B77 MKII from us completely overhauled and refurbished. The impressive end result is a product as good as new.

This product is currently not available.
8,980.00€*

Speed:

Tracks:

The B77 MKII tape recorder was built from 1980-1998. A true classic and milestone in the audio world, like its predecessor the MKI. The B77 MKII is equipped with a built-in sound motor control (Vari-Speed Control) and revised audio and drive electronics. As a manufacturer, we have been reconditioning our Revox units with original spare parts for decades. You will receive the B77 MKII from us completely overhauled and refurbished. The impressive end result is a product as good as new.

B77 MKII Tape Recorder

B77 MKII Tape Recorder

This product is currently not available.
8,980.00€*

Speed:

Tracks:

The B77 MKII tape recorder was built from 1980-1998. A true classic and milestone in the audio world, like its predecessor the MKI. The B77 MKII is equipped with a built-in sound motor control (Vari-Speed Control) and revised audio and drive electronics. As a manufacturer, we have been reconditioning our Revox units with original spare parts for decades. You will receive the B77 MKII from us completely overhauled and refurbished. The impressive end result is a product as good as new.

B77 MKII Tape Recorder

The main difference to the MKI is that the B77 MKII is equipped with a built-in tone motor control (Vari-Speed Control) and revised audio and drive electronics.

In addition to the standard version with speeds of 9.5/19 cm/s, the following models were available: B77-HS with 19/38 cm/s (High Speed), B77-LS with 4.75/9.5 cm/s (Low Speed), B77-SLS with 2.38/4.75 cm/s (Super Low Speed for monitoring tasks), B77-AUT0 with automatic recording start as well as three versions with additional pilot head for simple to sophisticated slide projector control. B77 synch tape recorders had a clock track amplifier for professional synchronous recording from the recording head. Finally, the B77-DOL offered separate Dolby TM-B processors for recording and playback (i.e. "dolbysed back-band" control) for the highest noise levels (19 cm/s, half-track, better than 74 dB).

 

SUSTAINABILITY: And even today, a B77 tape recorder can be integrated into the latest Revox Multiuser System, for example, and can even be controlled via the Revox App. Because sustainability is important to us.

 

The B77 MKII tape recorder was built from 1980-1998. As the manufacturer, we have been overhauling our Revox devices with original spare parts for decades. You will receive the B77 MKII from us completely overhauled and refurbished. All sound heads are replaced by new ones.

The impressive end result is a product in mint condition.

After ordering, you will receive a certificate.          
The unit has a 2-year warranty.

Accessories

 
 

Technical details

dimensions

weight (kg): 17
depth (mm): 207
height (mm): 414
width (mm): 452

Drive

Three-motor drive 2 AC coil motors 1 AC sound motor electronically controlled

Noise-to-voltage ratio (according to ASA-A, measured over band)

>64 dB (9,5cm/sec), >67 dB (19cm/sec)

Frequency response over tape

30 Hz bis 20 kHz + 2 dB bis - 3 dB, 30 Hz bis 16 kHz + 2 dB bis - 3 dB

Tape speed

HS 19,05/38,1 cm/s, NS 9,5/19,05 cm/s, LS 4,75/9,5 cm/s, SLS 2,38/4,75 cm/s

power consumption

max. 80 VA

Synchronisation fluctuation

38 cm/s < 0,06 %, 9.5 cm/s < 0,10 %, 19 cm/s < 0,08 %

Equipment

11 ICs, 1 optocoupler, 4 triacs, 60 transistors, 33 diodes, 5 LEDs, 2 bridge rectifiers, 3 relays

Slip

max. 0,2 %

Rewind time

135 sec. for 1100m tape

Coil size

up to 26.5 cm (10.5 inch)

Technical details

 

dimensions

weight (kg): 17
depth (mm): 207
height (mm): 414
width (mm): 452

Drive

Three-motor drive 2 AC coil motors 1 AC sound motor electronically controlled

Noise-to-voltage ratio (according to ASA-A, measured over band)

>64 dB (9,5cm/sec), >67 dB (19cm/sec)

Frequency response over tape

30 Hz bis 20 kHz + 2 dB bis - 3 dB, 30 Hz bis 16 kHz + 2 dB bis - 3 dB

Tape speed

HS 19,05/38,1 cm/s, NS 9,5/19,05 cm/s, LS 4,75/9,5 cm/s, SLS 2,38/4,75 cm/s

power consumption

max. 80 VA

Synchronisation fluctuation

38 cm/s < 0,06 %, 9.5 cm/s < 0,10 %, 19 cm/s < 0,08 %

Equipment

11 ICs, 1 optocoupler, 4 triacs, 60 transistors, 33 diodes, 5 LEDs, 2 bridge rectifiers, 3 relays

Slip

max. 0,2 %

Rewind time

135 sec. for 1100m tape

Coil size

up to 26.5 cm (10.5 inch)